产品留言

Choose from two types of test areas

Choose from 2 different capacities (1m3 and 2m3) of the VOC Emission Test Chamber according to the size of the specimen. You can perform VOC emission testing in various fields, from compact specimens to large specimens.

Supports various measurement specimens

This system can test everything from plywood, wallpaper, curtains, and other building materials and automotive interior parts to everyday heat-generating home appliances, such as computers and printers. In addition, it is equipped with cable ports to electrify the specimen.

Interactive input system for easy operation

The instrumentation has a color LCD screen and uses an interactive input system with touch operations to enable easy settings by anyone.

Ensures a TVOC value of at least 20 μg/m3 for the background concentration

The VOC Emission Test Chamber uses material with low organic emission and low adsorption, and it comes with a high performance clean air producing unit that removes unneeded gas in the air. It constantly provides clean air and ensures a TVOC value of less than 20 μg/m3 for the background concentration prior to test start.



VOC-1000 (air-circulating fan is provided as option)



VOC-2000

Accurate measurement

In addition to having a clear air producing unit, this system uses stainless steel in the test area and reduces the amount of volatile organic compounds (VOC) generated from non-specimen materials. The test area is mirror finished and prevents the accumulation of VOC generated from the specimen for more accurate testing.

Adjustable the ventilation count according to test conditions

The ventilation count can be adjusted in the range of 0.2 to 2.0 times/hour (0.2 to 1.5 times/hour on VOC-020 only) according to test conditions.




Paperless data recording

The paperless recorder enables recording of the test area temperature, humidity, and air exchange rate on a memory card (compact flash drive).







Model			VOC-1000	VOC-2000
Compact chamber	Temperature control range		+20 to +100°C :  At test operation (no load, with specimen)
			+80 to +250°C :  Heat processing operation time (no load, no specimen)
	Temperature and humidity control range		30 to 90%RH (at+20 to +50°C)(no load, with specimen)
	Temperature and humidity control width		±0.5°C / ±5% (no load, no specimen)
	Temperature and humidity distribution width*1		±1.0°C / ±5% (no load, no specimen)
	Background concentration		Less than 2 μg/m3 for single substance concentration
			Less than 20 μg/m3 for TVOC concentration
	Air exchange rate		0.2 to 2.0 times per hour (at test operation)	0.2 to 1.5 times per hour (at test operation)
	Air exchange rate control width		±5% (air exchange rate of 0.5 times per hour or higher)
	Mass transfer coefficient		9 to 18m/h (water vapor conversion)
	Air tightness		Air leakage under 1% of supply air amount (at air exchange rate of 0.5 times per hour)
	Recovery rate		80% or higher (Toluene)
	Effective inner dimension (W × H × D mm)		1000 × 1100 × 810	2000 × 1100 × 810
			(Inner capacity: Approx. 1 m3)	(Inner capacity: Approx. 2 m3)
	Material (Configuration)		Stainless steel plate (full circumference welded structure)
	Door effective dimension (W × H mm)		1000 × 1100	2000 × 1100
	Door lock		Latch lock (6 locations)	Latch lock (16 locations)

Outside dimensions (W × H × D mm)			2250 × 1950 × 1520	3250 × 1950× 1520
Door effective dimension (W × H mm)			1600 × 1570	2600 × 1570
Air circulator			Cross line flow fan
Refrigerator			Indoor air-cooled fully sealed (Refrigerant: R134a)
Heater			Nichrome strip wire heater
Evaporator			Multistage plate fin cooler
Chamber weight			Approx. 1000 kg	Approx. 1800 kg
Accessories			Recorder (paperless recorder), Integrating hour meter, Caster, Sampling port for specimen collection (2 locations), Air-circulating fan (VOC-020)
Utility requirements	Power source facilities	Power supply	AC200V 3φ 3W 50/60Hz Allowable voltage fluctuation :  Rated voltage ±5% (The allowable operating range is the rated voltage ±10%)
		Maximum load capacity	11.5kVA (15.8kVA when equipped with air compressor)
		Maximum current	32.0A (45.6A when equipped with air compressor)
		Leakage breaker capacity	40A (50A when equipped with air compressor)
	Compressed air	Discharged air flow	160 L/min or highe (atmospheric pressure) Oil-free
		Control pressure	0.6 to 0.9MPa
		Connection tube outer diameter	φ10mm
	Exhaust	Exhaust duct diameter	φ100mm (Flange diameter φ150mm)
		Discharge air volume	Max. 120 m3/h or higher
		Construction requirements	Constructed with metal duct. Total pressure loss of exhaust duct at 100 Pa or lower.
	Supply water	Quality	Pure water (Quality equivalent to A1 water specified in JIS K0557)
		Maximum water supply rate	20L (manual supply)
	Natural drainage pipe		Indirect drain VP30 1 units
	Floor load capacity		350kg/m2	350kg/m2

*1 Measurement method complies with Japan Testing Machinery Association (JTM). However, the calculation method is half the maximum value minus the minimum value when stable.

• This is the measured performance at the control point after stable operation for 30 minutes with an ambient temperature of +5 to +32°C and no load.
• The allowable voltage fluctuation is within ±5% of the rated voltage, and the allowable frequency fluctuation is within ±1% of the rated frequency.
• TVOC concentration of installation space (supply air) must be less than 300 μg/m3, and there must not be a significant fluctuation.