产品留言

电池内短路试验机 Battery Internal Short-Circuit Tester

一、相关标准测试要求 Test requirements

1.IEC62133-2012

二、主要技术参数 Main Technical Parameters

 

型号 Model	PNDL-225
温度箱参数Temperature Chamber Technical Parameters	温度范围Temperature Range	-10℃ ～ +80℃（可调）（Controllable）
	升温速率Temperature Rising Rate	平均3℃/min（从-10℃升到80℃、非线性空载）Ave.3℃/min（-200℃ to 100℃、Nonlinear No-load）
	降温速率Temperature Cooling Rate	平均1℃/min（从80℃降到-10℃、非线性空载）Ave.1℃/min（100℃to -20℃、Nonlinear No-load）
	内箱尺寸Inner Chamber Dimension	W600 X H750 X D500 MM
	外箱尺寸External Chamber Dimension	W1170 X H1850 X D1020MM
	内箱材质Inner Chamber Material	镜面不锈钢板,底部补强Mirror stainless steel with bottom reinforcement
	外箱材质External Chamber Material	冷轧钢烤漆处理Cold-Rolled Steel with paint-baking treatment (gray-white color)
	观察窗 Observation Window	单开门上附有发热防汗3层真空大玻璃观察视窗(W430mm xH 580mm); 门框备电热（自动调节）防结霜、防凝露装置；使您在任何时候都可以通过观察窗清晰地观察箱内供试样品的试验状况The single-opening door is accompanied by a 3-layer vacuum large glass observation window (W430mm x H 580mm); The door frame is equipped with electric heating (automatic adjustment) anti-frost, anti-condensation device; so that you can clearly observe the Test status of the test sample in the box through the observation window at any time.
内短路主要技术参数 Technical Parameters	*大载荷 Max. loading	200KG
	值解析度Resolution	1/10000
	力值精度 Force accuracy	≤0.5％
	位移解析度Displacement resolution	1/1000
	位移准确度Accuracy of displacement	≤0.5％
	速度范围 Speed range	0.01－5MM/S
	有效行程 Effective Range	0 ~ 200mm
	测试*大平面 Max. test plane	300X300MM（特殊测试宽度亦可依客户需求定制） 300X300MM Can be customized
	电压采集范围 Voltage range	0—60V
	电压分辨率 Voltage resolution	5mV
	电压采集频率Voltage acquisition frequency	100HZ
控制系统 Control system	伺服电机+伺服控制系统 Servo motor + servo control system
安全防护装置Safety protection device	Explosion-proof pressure relief device, smoke exhaust device, fire extinguishing system, electronic door lock system, safety stop switch